Morana Products

Throttle Body Supercharger
TOLL FREE LINE
4.2 L Products
Reproduction Supercharger
Alternater/Water Pump Kit
3.8 V6 Products
4.6 Products
4.0L Products
3.8 V6 Stroker Kits
3.0 L Products
2.9 V6 Performance
Heads
ARP Fasteners
Cylinder Head Gaskets
Screw in Studs
Roller Rockers
Guide Plates 3.8
Performance Camshafts
Roller Lifters
New Heavier Springs
Longer Hardened Pushrods
Larger Stainless Steel Valves
Pistons
Connecting Rods
3.8 4 barrel intake 82-98
RARE  Items for Sale
Stud Girdle
Double Roller Chain
Windage Tray
Exhaust
Crankshafts
Throttle Body
Distributor
Custom Aluminum Fuel Rails

Morana 4 pc single t/b intake

Morana 4 pc single t/b intake

Morana 4 pc single t/b intake
Application: 3.8 V6, 3.9 V6 and 4.2 V6 Ford-1997-
            2004 Mustangs and F150's

This intake comes with the adapter plater, our modified upper intake,upper intake housing, and 65mm.throttle body

The advantage of this unit is that you gain more clearances under your hood by getting rid of the upper intake completely, which also loses some weight, and makes getting at your fuel rails, valve covers etc... much easier.  

This unit can be fully ported at request(add $500)US.
PRICE: $650.00
Instructions: IMG_0067.JPG (97.9 Kb)

Twin Port Conversion Intake

Twin Port Conversion Intake

Twin Port Conversion Intake
Application: ANY 99-2004 3.8 V6 Ford twin port  
            or 4.2 engine

This custom intake will allow you to convert your single port..to a twin port set-up.  

This intake needs to be used with our lower intake (see instructions)

US. funds
PRICE: $450.00
Instructions: 010.JPG (81.8 Kb)

Mega Morana M112 Intake

Mega Morana M112 Intake

Mega Morana M112 Intake
Application: 3.8 or 4.2 V6 Ford 97-2004
            Mustangs, F150, Windstar, Freestar

This Mega Intake is as big as it gets-it has the biggest potential air flow of any 3.8 intake.

It contains the lower intake, the M112 adapter plate, an intake gasket and stainless steel bolts.

Can be used for a twin port swap for 98 and back Mustangs, Cougars,

With an M112 you can expect 60 hp.

Maximum porting of the intake and adaptor plate, add $500 US. funds
PRICE: $720.00
Instructions: 01.JPG (82.8 Kb)

Morana Box Intake

Morana Box Intake

Morana Box Intake
Application: 3.8L V6 1987-98 Ford Mustangs, Thunderbird, Cougar, Sable, Taurus, Lincoln for single port heads


This new Morana exclusive is an easy bolt-on, with all the necessary hardware and instructions

Over 20 h.p.

This intake equalizes the intake volume runners.

Has a larger reservoir box, which helps with low end torques

This intake includes a much larger than stock twin throttle body, giving you more air and horse
power.
PRICE: $750.00

Triple Throttlebody Intake Combo

Triple Throttlebody Intake Combo

Triple Throttlebody Intake Combo
Application:   Any 3.8 V6 FORD 88-98
            Can be adapted to 82-87

Advantages:  
A great show piece for Hot Rodders, Drag Racers etc.
Easy 30+ hp. gains.
Rougher race sound.
Fits under any hood (incl. stock).
Includes custom intake, stacks and linkages. Fuel rails, porting optional.  

In order to use this intake set-up...the motor needs to be changed from mass air set-up, to speed density

Introductory price:
1,200.00 US.
PRICE: $1 200.00
Instructions: Triple throttlebody in mustang.jpg (511.5 Kb)

MORANA Eliminator Intake

MORANA Eliminator Intake

MORANA Eliminator Intake
Application:  3.8L V6 87-98

This manifold is in it's final stages of development!!

Some of the many advantages of this MORANA intake, is that it allows you to tune your car, while it's running!

Quick and easy to get to your valve covers and fuel rails.

You also have the advantage of going with a twin throttle body (available from Cobra's) optional

Price is still being worked out.

Attractive MORANA custom fuel rails coming.

**CURENTLY UNAVAILABLE**

PRICE: $900.00
Instructions: 3.8 Upper Eliminator Manifold.jpg (1.3 Mb)

Universal Intake Manifold

Universal Intake Manifold

Universal Intake Manifold
Another MORANA exclusive product!

This exclusive Morana design, will convert your fuel inject engine, to a carb'd engine.

It can also be used for those who have a 98 & back engine, but would like the benefits of using the twin port later model heads, and still be able to convert your engine to a carb'd engine!

You could also drop a 97 & back engine, into your later model Mustang, and have a carb'd engine, simply by using our Universal Intake!

Application: 3.8 V6 FORDS 97-04

Intake is made of 1 pc cast aluminum.
Includes adapter plate(not shown)
Adapter available in aluminum.

Introductory SPECIAL: $450.00 US.



PRICE: $450.00

4 Barrel Universal Intake Manifold

4 Barrel Universal Intake Manifold

4 Barrel Universal Intake Manifold
An extension of our 2 Barrel Universal Intake!

Application: 3.8 V6 FORD Mustangs(99-04), Windstar(97-06)or 4.2 V6 FORD F150(97-06)

This exclusive Morana design, will convert your fuel inject engine, to a carb'd engine.

You could also drop a 97 & back engine, into your later model Mustang, and have a carb'd engine, simply by using our Universal Intake!

Also needed for the conversion is an electronic distibutor, and an MSD Box-We can supply both.

Also, you have the option to convert your 82-98 3.8 v6 Ford Mustang, Capri, Cougar, Thunderbird, Taurus,Lincoln or Sable to a twin port motor

Intake is made of 1 pc cast aluminum.
Includes spacer(shown)
Spacer available in aluminum.

Introductory SPECIAL: $450.00 US.



PRICE: $450.00

3.8 4 Barrel Aluminum Intake

3.8 4 Barrel Aluminum Intake

3.8 4 Barrel Aluminum Intake
Will fit ANY 3.8 V6 Ford (FWD or RWD)

Custom 4 Barrel 4 hole intake for Holly Carburetor fully ported.

1982-87 $350 (unported) add $150. ported
1988-98 $500 (unported) add $150. ported

**Add: $100. CAD. core charge

With this unit you'll also need to get-
distributor
modual box
carb
which we can supply if interested

US. funds
PRICE: $600.00

3.8 Morana Combination Manifold

3.8 Morana Combination Manifold

3.8 Morana Combination Manifold
1988-98 Street or strip use.

Another Morana exclusive!
3.8 intake with single throttle body(choice of size) and fuel rail system.

Good choice for N/A or use with superchargers, as it cleans up under the hood and makes lots of room to get at your valve covers, fuel rails etc...

This unit eliminates the need for the original upper & lower intakes, saving at least 25 lbs. of weight!

INTRODUCTORY SPECIAL-
$1,150.00 US. per unit or,
$1,400.00 US. fully ported

PRICE: $1 400.00

Upper Intake

Upper Intake

Upper Intake
3.8 V6 1988-95
Ported for greater air flow capacity.

Porting                $175.00 US.
core charge (88-95)    $125.00 US.
core charge (96-98)    $125.00 US.

(refundable if you return yours)

PRICE: $175.00

1988-98 Lower intake Manifold

1988-98 Lower intake Manifold

1988-98 Lower intake Manifold
Application: 3.8 V6 Ford
1988-1995

Ported, polished
Add $125.00 US. core charge (88-95)
Add $125.00 US. core charge (96-98)

(refundable upon receipt of your core)
PRICE: $275.00

Upper Intake

Upper Intake

Upper Intake
3.8 V6 1999-2004

Ported for greater air intake capacity.

Porting $225.00 US.
Core charge add $125.00 US.(refundable if you return yours)
PRICE: $225.00

1999-2004 Lower Intake Manifold

1999-2004 Lower Intake Manifold

1999-2004 Lower Intake Manifold
Application: 3.8 V6 Ford 99-04

Port,and polished

Add 125.00 US. core charge(refundable upon receipt of your core intake)
PRICE: $325.00

Upper Intake

Upper Intake

Upper Intake
3.8 V6 1988-99

SPECIAL ORDER ONLY

Shortened (for higher rpm's) and fully ported.
Add $50.00 US. refundable core charge.
PRICE: $500.00

Click here for Disclaimer  

Click here for Return Policy  



We accept:

Direct bank deposit
US Money Order

Designed and hosted by ICM Consulting ;